Hanna Instruments PH7 Buffer Solution (Clear) (UN NR) 500ml

The pH 7.01 buffer in a 500ml bottle is the most commonly used buffer solutions.

pH 7.01 is ideal for those requiring an accurate neutral reading, particularly those working in water purification plants, the food industry, aquatics, and Hydroponics, and wherever the pH is expected to be neutral. Latest Hanna portable and bench microprocessor instruments are calibrated with pH 7.01.

Buffer solutions should be stored at 25 C, away from direct sunlight for accurate readings.

To correctly maintain your meter/electrode, we highly recommend use of a Hanna cleaning solution, as well as a buffer, for maximum performance every time. pH7 can also be used as an emergency storage solution.

Hanna buffer solutions are prepared, ready-to-use, according to precise formulas and standardised in accordance with the National Institute of Standards and Technology (NIST) to ensure quality and accuracy. All solutions show a batch number, an expiry date, and the correlation table between pH and temperature. A certificate of analysis is available on request. All bottled solutions are sealed with an air tight, tamper-proof seal to prevent any Carbon Dioxide from entering and causing a change in the pH buffer value.

Hanna complete range of solutions

• pH buffer solutions
• Standard solutions for conductivity, Total Dissolved Solids (TDS), turbidity, salinity and Ion-Selective Electrode (ISE) calibration
• Oxidation Reduction Potential (ORP) test and pre-treatment solutions
• Reference fill solutions for refillable electrodes
• General and specific cleaning solutions for electrodes
• Solutions for electrode maintenance and storage
• Solutions for sample preparation

For safety and traceability, all Hanna solutions are provided with a label showing the batch number and expiry date. A certificate of analysis is available on request in line with NIST standards.

Remember:

• Calibration only counts when using fresh solutions and properly cleaned electrodes every time.
• Routine maintenance will ensure accurate readings while extending the life of the electrode.