€6,776.23
Inc. VAT
€5,646.86
Ex. VAT
If you have an account:
Description
The Lovibond® COD Setups allow highly sensitive and precise water testing with minimum effort. They measure the ST-COD concentration by photometric detection employing a linear relationship between absorbance and concentration.
After adding the sample to a Lovibond® COD tube test (LR, MR according to ISO 15705:2002), it is heated in the reactor for two hours at 150 °C and then analysed in the photometer.
The COD Setups comprise the photometer, 25 tube tests for each of the two lower measuring ranges, a reactor for sample digestion and a vial stand.
Key Features
- ST-COD sealed tubes ready for use
- Suppression of chloride interference up to 1000 mg/L (LR & MR) up to 10000 mg/L (HR)
- Mercury free tube tests,in absence of chloride interference
- 4 ranges:
- Low range: 3 - 150 mg/L, meets ISO 15705:2002
- Middle-low range: 15 - 300 mg/L, meets ISO 15705:2002
- Middle range: 20 - 1500 mg/L, meets ISO 15705:2002
- High range: 200 - 15000 mg/L
Related Products
Related Products
MD200 COD Vario Setup Each
€4,594.36
The Lovibond® COD Setups allow highly sensitive and precise water testing with minimum effort. They measure the ST-COD concentration by photometric detection employing a linear relationship...
2892602
MD200 COD Vario Photometer Each
€1,654.46
Versatile, compact and: The benchtop photometer MD 200 combines high-quality interference filters with long-term stable LEDs as light sources in a high-precision optic.
The result: precise...
2892502
COD Standard Solution, 300 mg/L as COD (NIST) 200ml Each
€54.57
COD Standard Solution, 300 mg/L as COD (NIST) 200ml Each
1218629
MD110 BTH Photometer COD with TT Each
€1,703.13
All MD 110 photometers have a Bluetooth® function. To make the most of it, Tintometer offers an app for mobile devices as well as a PC software with dongle.
The measurement results are...
2961202
Support Base for Filtration System Each
€188.66
Comprising of a 300 ml capacity funnel, support base and metal clamp, this popular size filter holder is designed to be used with 47 mm membrane filters.
The three components of this product must be...
5809/3
